KOMICRO naftna bušotina

Address

KOMICRO production and distribution d.o.o.

Žitnjak b.b,
10 000 Zagreb,
Croatia

tel:  + 3851 240 4409
fax: + 3851 240 4552

E-mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it

 

CRODAX IC 161

CRODAX IC 161
OXYGEN ABSORBER

 


CRODAX IC 161 is an oxygen absorber, dissolved in water, used in injection system, to protect them from oxygen corrosion. The product is concentrated and acting fast as an oxygen absorber.


TYPICAL PROPERTIES:
Value: Method:

Appearance:
Clear liquid
Density, 20°C
Approx 1330 kg/m3
DIN 51757
Flash point, °C
> 65
DIN 51755
Pour point, °C Approx -40
DIN ISO 3016
Viscosity, 20°C Approx 25 m Pas
DIN 51550
pH Approx 5,2 - 5,6



SOLUBILITY:


CRODAX IC 161 can be dissolved in water, and not dissolve in organic solvents.

 

DOSAGE AND APPLICATION:


CRODAX IC 161 is dosed undiluted into injected water after vacuuming e.g., when there is no contact between water and air.
Vacuum systems for injecting water: 2-10 ppm CRODAX IC 161 for absorbing oxygen, after mechanic vacuuming
Open systems for injecting water: 10 ppm (ml/m3) CRODAX IC 161 for 1 ppm (ml/l) of absorbed oxygen
Theoretical equivalent of dosage: 7 ppm (ml/m3) CRODAX IC 161 for 1 ppm (ml/l) of absorbed oxygen

REMARK
Chlorine which is left in the injected water can quicken oxygen absorption up to 5 ppm, however for every ppm chlorine, 3 ppm of CRODAX IC 161, should be used.


HANDLING:


In handling CRODAX IC 161 use of protective means is mandatory. In case of spillage, contaminated parts should be rinsed with running water. In case of eye contamination, a doctor should be consulted.



STORAGE:


CRODAX IC 161 is to be stored in its original containers and at temperatures not higher than 45°C.

 


PACKING:


CRODAX IC 161  is supplied in of 235 liters or in road tankers.

Copyright © 2018. Komicro d.o.o. Sva prava pridržana. Izrada web stranica Dedal komunikacije d.o.o.